Lrp shark springs

PaulRotheram · #1 12-10-2010

Just looking to see if there's a spring set available for the shark, would like a couple different ones to play around with.
And if not, what are the common weights/colours everyone goes for?

RCAshers · #2 13-10-2010

Hi Paul most used springs are kit there are green springs slightly firmer and yellows slightly softer but most people go back to kit. Regards Ashley

PaulRotheram · #3 13-10-2010

Are the kit ones black? That's the colour I have on the ones I've picked up at the moment.
Do you have green springs by chance? Need to email you Regarding pinion today too!

Body Paint · #4 13-10-2010

Kit springs are black, yes.

I run greens all round on mine

Danosborne6661 · #5 13-10-2010

I use the slightly firmer greens but raw them as the green looks gay

The black LRP springs are identical to the FTX yellows too

Also the blue springs are the same rate as the greens even though they are labeled 'Extra firm'

All the coloured roll-bars are also identical so don't try tuning the roll bars against one another, there's no difference

Jonesy · #6 13-10-2010

Quote:

Originally Posted by Danosborne6661

I use the slightly firmer greens but raw them as the green looks gay

The black LRP springs are identical to the FTX yellows too

Also the blue springs are the same rate as the greens even though they are labeled 'Extra firm'

All the coloured roll-bars are also identical so don't try tuning the roll bars against one another, there's no difference

Not fully in agreement with your comments on the springs Dan. I tried the Blues the other day during spring testing and I found the Blues to be a lot firmer than the greens on the front, took them straight off!

Rothers - I have some springs if you're coming along to EPOR on Friday??

PaulRotheram · #7 13-10-2010

Cheers for the info guys!
I thought as much on the roll bars, all the same thickness!!
Jonesy can't make it this Friday as I'm working but trying to get a shift swapped for the one after if you can keep them for me please?
Looking to run my LWB before formby starts!

Oscar · #8 14-10-2010

My car was originally an MB4 not a shark, so I bought all the springs. My Blues are quite a bit firmer than the greens. I have no idea where the black Shark kit ones sit in comparison?