The heatsink has come off my ESC

[littlened]

I tried to pull my ESC out of the car and the heatsink has come off.

Can someone tell me what I need to glue it back on?

[bigred5765]

heatsink tape
http://www.ebay.co.uk/itm/3M-Glue-Ta...item27c278c567

[fidspeed]

looks like heat sink is still attached to top plate to me you need a thermal compund glue not tape

not sure wether you need to clean old compund off fets tho

regards dave

[mark christopher]

when mine came off i bought some heat sink paste from maplins aplied it to the fets then super glued the plate to the edges of the speedo, never been off since

[littlened]

Originally Posted by fidspeed

looks like heat sink is still attached to top plate to me you need a thermal compund glue not tape

not sure wether you need to clean old compund off fets tho

regards dave

Thanks Dave,

I've ordered some thermal glue, hopefully that'll solve it.

[fidspeed]

no worries

as MC states a drop of superglue to seal the plate to the case once you have fixed back in place wont go amiss

welcome back to rc were a friendly bunch on here (mostly )

dave Fid

[AC199]

Your best bet to stick it back on and provide optimum heat transfer, would be to find some Arctic Epoxy. When i was a lad and overclocking PC's, if we needed to fix a HS onto a north or southbridge, we always used Arctic Epoxy, excellent heat transfer characteristics and your chances of getting it off again are pretty remote...

Search for it on your search engine, but I think Scan.co.uk still sell it.

AC