|
#1
|
||||
|
||||
Sworkz S104 Evo Thread
So these have been selling like hot cakes. Got mine all ready to roll and have to say it's a superb bit of kit.
Get your pics and any questions posted in here
__________________
Stephen Smith Answer RC Team HB Racing | Team Orion | Xpert | Racing Experience Last edited by s22jgs; 12-09-2015 at 03:08 PM. |
#2
|
||||
|
||||
3mm Rear Arm Mod
This is not something that is required, however, with the high grip tracks in the UK, this may be something you might find useful if running on carpet or astro.
I have removed 3mm from the rear side of the rear arms. It increases the available wheelbase from 275-278 up to 275-281. As a point of reference, the Xray XB4 is 279-281, so you can see how much adjustability this gives you for different surfaces. Pictures below, any questions just ask
__________________
Stephen Smith Answer RC Team HB Racing | Team Orion | Xpert | Racing Experience Last edited by s22jgs; 12-09-2015 at 03:09 PM. |
#3
|
|||
|
|||
Wot wing is that your running. ..Steve
|
#4
|
||||
|
||||
A Yokomo one. It came with the YZ2. I would normally go for one of the LMR wings, but due to the low wing mount, this seems to be a good fit with the raised section over the wheels.
__________________
Stephen Smith Answer RC Team HB Racing | Team Orion | Xpert | Racing Experience |
#5
|
|||
|
|||
evo vs b-max4
hi,
can this one be competitive with b-max4 on small-tight high grip carpet track? have been decided to go with b-max, but this thing realy looks good... what option parts is necessary for this kit to be good on carpet? I heard that kit springs are to soft...is it any other mods necessary? |
#6
|
||||
|
||||
thanks
Cheers for the pics Steve, ive been chatting to pete about one.
are you at bury tomorrow,would be nice to get a close up of one. Hoping chris Elsworthy has his running as one of the guys before said, be good to see them up against the bmax
__________________
PR Insidelinemodels |
#7
|
||||
|
||||
Not racing tomorrow mate as I'm at a wedding darn sarff. Will get it built this week then begin testing. Anybody running the new 104 evo who needs advice let me know as I would be happy to share/discuss.
Chris Team SWorkz UK/Answer RC
__________________
PR Racing - Insidelinemodels - RC Concept - LMR - BMM Racing - MB Models |
#8
|
||||
|
||||
Quote:
By the new design features the car should be better than the previous version on high grip. And even more so if you increase the wheelbase like i have. On low grip you have i think the shortest wheelbase available on the 10th racing market, so nothing is going to come close on a really tight twisty track. Some guys in Aus have already done a comparison between the S104 Evo and the BMAX 4 iii. https://www.youtube.com/watch?v=IHhSG6gZz1k
__________________
Stephen Smith Answer RC Team HB Racing | Team Orion | Xpert | Racing Experience |
#9
|
||||
|
||||
Quote:
Er nope im down South mate As Chris said though, just ask if any questions about the car etc. Off to Herts now to pit for the Sworkz nitro boys
__________________
Stephen Smith Answer RC Team HB Racing | Team Orion | Xpert | Racing Experience |
#10
|
||||
|
||||
Steve,
Interesting mod, would that be worth doing on my current runner? Also interested to know if the motor mount would fit my currebt runner.
__________________
www.kamtec.co.uk www.fibre-lyte.co.uk answer-rc.com/uk/en/ Answer UK team driver Designer of the Lazer ZX/ZXR carbon fibre tub chassis Designer of the Lazer ZXRS |
#11
|
||||
|
||||
Steve
How easy is it to whip out the diffs?
__________________
PR Insidelinemodels |
#12
|
||||
|
||||
Quote:
Probably not a bad idea to try. you need to think about lining the shocks up though. The new car angles the shocks forward, so moving the bottom arms backwards actually brings them in line with the standoffs. I cant remember what the old car is like. The motor mount may fit, you can run a slipper with it, so the spacing should be the same. You would need the other centre bulkhead peice though as the diff sits about 7mm lower on the new car.
__________________
Stephen Smith Answer RC Team HB Racing | Team Orion | Xpert | Racing Experience |
#13
|
||||
|
||||
4 screws pretty much. The front of the gearbox case just comes away.
__________________
Stephen Smith Answer RC Team HB Racing | Team Orion | Xpert | Racing Experience |
#14
|
||||
|
||||
thanks
have you had chance to run it yet? think im getting my lad one this week off Pete
__________________
PR Insidelinemodels |
#15
|
||||
|
||||
i gave it a run in the astro yesterday at Herts.
Seems very good. Puts power down really well, very stable and loads of steering.
__________________
Stephen Smith Answer RC Team HB Racing | Team Orion | Xpert | Racing Experience |
#16
|
||||
|
||||
thanks
My lad loves lots of steering so will be happy with that
How are the arms on it? any breakages?
__________________
PR Insidelinemodels |
#17
|
||||
|
||||
Began my build last night and must say the quality of the plastics and machining are as good as I have come accross.
Experienced a little bind in the drivetrain once the diffs were installed which I found to be caused by the screws on the gear diffs not being wound down super tight. In the past with other cars I have only had the 4 screws in the diff snug to avoid cross threading the plastics on the other diff half so tried that approach on the Evo to begin with. This caused my bind as the diffs are a very precise fit in the gearboxes so make sure the screws are done down tight when building.. The plastics on this car I'm sure will take the extra pressure. Other than that the car has built superb so far. Chris
__________________
PR Racing - Insidelinemodels - RC Concept - LMR - BMM Racing - MB Models |
#18
|
||||
|
||||
You will be going some to break the plastics
__________________
Stephen Smith Answer RC Team HB Racing | Team Orion | Xpert | Racing Experience |
#19
|
||||
|
||||
nice
put some pics up when your done chris
what configuration have you built it in ? What electrics are you going to be running
__________________
PR Insidelinemodels |
#20
|
||||
|
||||
Quote:
__________________
www.kamtec.co.uk www.fibre-lyte.co.uk answer-rc.com/uk/en/ Answer UK team driver Designer of the Lazer ZX/ZXR carbon fibre tub chassis Designer of the Lazer ZXRS |
|
|