Setup for Indoor Wooden Gym Floor

[Rich D]

Hi Folks

I intend running my B44 for the first time in a couple of weeks time once i complete the build and the rest of the upgrade parts are here.

Our club race TC only but a couple of us have began to get buggies again too to try and rekindle the genre.

Parts ill soon have available to me are :-

Full Spring set
ARB set
Front one way
Novak 6.5 GTB system

We use yellow 21mm minipins for the TC`s so ive got myself a set of those for the B44 and also some yellow full spikes to try ( these used to work great at our old wooden floor venue ! )

The track will be flat ( for now ), main straight is approx 50ft with numerous 90 degree turns usually. Lap times 15 to 18 seconds dependent upon the track.

So, i was wondering what springs/oils/shock positions/ride height etc you guys would recommend as a base setup please ? Should i fit the one way from new ?
Im a novice at setting cars up so any advice would be greatly appreciated.

( all the gear not much of an idea atm )

Thanks a lot !

Richard