Mad monkey

[spindles69]

Have been running the mad monkey for the last three weeks at my local indoor club.
I transfered all the electrics from my rb5 to the m/m just to try it out.
I run a s/p 6.5 on 21/standard spur.All i have done from standard is xpro shocks, bearings,turnbuckles and a 40g lead weight under speedo.
Going by how the m/m is going at the moment elecrics will be staying in the m/m.Very impressed by it so far.Only mod i have done is to put a long cable tie through the inside hole of rear shock tower just to make it a bit stronger,also will be adding a strip of 2mm ally the width of the front kickup running the length of the chassis as i have done to my two boys x pros and had no t piece breakages and no front plate breakages (bombproof).
Any future mods i will post and let you know how they perform.
Cant wait to try outdoors but needs to warm up a bit first(old man old bones)