vega b4.1 build Qs

[Andyp]

Just built up my b4.1 conversion today, im just no sure about a few bits, I had already read about the rear wishbones turn and dremel clearance for the outdrives.

I also found i had to shim the layshaft slightly on the spur gear side to stop end float and to give clearance between the gear and housing

the last thing was that i shamfered the ae toe in block on the rear slightly so it gave the motor full movement

Not big problems just wanted some reasurence that it what others have done .


By andypearson at 2011-05-14

By andypearson at 2011-05-14

By andypearson at 2011-05-14

By andypearson at 2011-05-14


Cheers