SP LPF Motor turning in wrong way

[jasjeet]

I cant get this sorted, just installed the SP LPF into the DEX410R and trying to set it up with the SR300 rx and DX2.0 tx.

But the motor spins in the wrong direction so the car is reversing when trying to go forward.

Ive tried resetting the ESC, i hold red button then turn on, press red button, hold full throttle and press red button then hold reverse and press red button.

Ive also tried putting the Throttle to Reverse mode on the DX2.0, although the car now goes in the correct direction, it has forward speed in reverse and slow speed in forward. Then if i re-calibrate i get the same thing as before...

What to do???