|
#1
|
||||
|
||||
![]()
just bought a supastox 2nd hand , ( not as nice as i was told it was !! ) it has the optional independant wishbones fitted , anyway im stripping it and putting it back to a kit set up , but want to make sure i get the front end to a basic set up using the optional wishbones..
has anyone got a diagram of the front end ?? cheers ![]() |
#2
|
|||
|
|||
![]()
have a look here
http://www.racing-cars.com/pp/Car_Sh.../SupaStox.html |
#3
|
||||
|
||||
![]()
download this http://www.racing-cars.com/images/Te...tox_Manual.pdf
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
#4
|
||||
|
||||
![]()
thanks for your help , but im after a basic/starter setup using the optional wishbones , ive just re-edited my first post ...
EDIT... ive just set it up with 5degree castor , and 1degree camber ... will try that ....cheers |
#5
|
|||
|
|||
![]()
I have had three meetings with the independent wishbones and find 3mm shims on the caster side and 2mm shims on the camber side works best
![]() Two of the three meetings was Q1/F1 in the A ![]()
__________________
Martyn Kyosho | Team Orion | Sanwa | Rudebits | Proline |
![]() |
|
|