|
#1
|
||||
|
||||
cougar sv batts
Hi all,
just bought myself a cougar sv1 with an +8mm chassis and its set up for stick lipos, could any one let me know what size lipos fit in the space or what people are using, i have saddle pack lipos at the moment which fit my 4wd so i dont know weather its going to be cheaper or better to buy the posts and top tray and go with saddle packs, thanks in advance for any help, rob. |
#2
|
|||
|
|||
fit the saddles in "end to end", they fit fine and wont go anywhere
|
#3
|
|||
|
|||
I use gen ace stick pack on the giant shark websit, 5300 mah 30c mate
|
#4
|
|||
|
|||
I went for the saddle pack tray conversion, you will need U3764 (the tray) & U3702 (the saddle pack posts) they have them at wheelspinmodels.
wheelspinmodels.co.uk/i/73829/ & wheelspinmodels.co.uk/i/73826/ Here is the kit on mine Great if you decide to run saddles. I imagine if you already have saddles they would be the way to go, that way if you sell the cougar you can use them in your existing car |
#5
|
|||
|
|||
tramp
what about the real plastic on the upper carbon colder it is made to hold the rear cell when you put them inline did you trimmed the plastic ? |
#6
|
|||
|
|||
Yeah, i just cut the 'stick' holder off flush using a junior hacksaw, I know now ill never be able to use sticks in it but i only have saddles so its not an issue to me,
|
|
|