|
#1
|
||||
|
||||
22 2.0 ride height
hi
having abit of trouble with my ride height the maximum the front ride height will go is 19mm (this is with the collars down to the bottom of the thread on the shock body) but with the rear the min is 19mm (this is with the collars at the top of the thread on the shock body) and i then can adjust the ride heighe if need be but on the front i cant go any heigher than 19mm as there is no thread left on shocks im running 4x55 hole pistons front and rear & 37.5wt in front and 30wt in rear could anyone help what could be cauing this....shocks are built perfectly too running no rebound thanks
__________________
BMRCC Member TLR 22 2.0 Speed Passion Sanwa SMC |
#2
|
||||
|
||||
What springs?
How many limiters have you in the shocks?
__________________
Horizon Hobby de, TLR, Spektrum, Mad Models. Last edited by Pank; 21-01-2014 at 07:06 PM. Reason: adding text |
#3
|
||||
|
||||
Forgive me if this may sound obvious but are you checking the height whilst the car is ready to run ? ie with the battery installed too ! As this would effect things without a doubt !
__________________
Associated B6.1 & B74.2 Lots of bling bits Reedy electrics KO Propo Espirit 4 stick radio Dji Mavic Air2S All round gadget freak ! |
#4
|
||||
|
||||
Hi
I'm running blue losi springs on front and sometimes black ones To be honest there is either 2mm limiters or none...I can't remember but going to check after Yep this is done ready to race with battery and shell Thanks
__________________
BMRCC Member TLR 22 2.0 Speed Passion Sanwa SMC |
#5
|
|||
|
|||
If you release your front shocks from the wishbones have u checked if your wishbones move freely?
sometimes over tightening the grub screws which hold the hinge pin in place can make the wishbones move stiffly and limit the shock movement.
__________________
LMR - Yokomo - YZ-2 - BMAX - Sanwa - MuchMore - Xpert - Mugen Seiki |
#6
|
||||
|
||||
Quote:
wishbones are not stiff and free to moved ive got 3mm limiters in the shocks too shocks shafts are fine and not bent im really stumped as to why the collars are all the way down just to get 19mm ride height with the collars half way.....im getting about 8mm ride height
__________________
BMRCC Member TLR 22 2.0 Speed Passion Sanwa SMC |
#7
|
||||
|
||||
It's not the length of your shocks is it !
__________________
Stevie Brew BW-RACING@HOTMAIL.COM http://www.oople.com/forums/showthre...hlight=stegger |
|
|