|
#1
|
||||
|
||||
EOE regionals
Good result for the D413 today at the EOE regionals which were held at ARC raceway.With the track being very bumpy astro i went with Tsuyoshi Itou's setup which worked ok.The only thing that was different was i used 10,000 diff oil in the front.Q5 for the A final after some hard heats.Managed to finish second overall with the car.Still some work to do but am very pleased with the cars performance so far.
__________________
Corally SBX410 Associated B6d Tamiya M05 Tamiya M06 low rider pumpkin TLR 1.0,3.0 scte Yeldnips racing products Xfactoryuk Dms racing Corally uk |
#2
|
||||
|
||||
Could you post your shock setup? I ran the car on Sunday at Grantham A1.
I used two hole pistons - front 1.5mm with 37.5WT and rear 1.7mm with 30 WT. The car was ok but thought the kit 4 hole pistons at 1.3mm may have been better. |
#3
|
||||
|
||||
Quote:
Fronts were 1.5mm with 60wt and rears were 1.7mm 45wt.Track was very bumpy astro with big jumps.Ideally would have gone down to 50wt front and 40wt rear.Just a bit skittish on the oils i was using.
__________________
Corally SBX410 Associated B6d Tamiya M05 Tamiya M06 low rider pumpkin TLR 1.0,3.0 scte Yeldnips racing products Xfactoryuk Dms racing Corally uk |
#4
|
||||
|
||||
eoe regional
id just like to add to mr spindleys post ...
mike had a good day and i also made the main with my d413 first time out .. my set up regards to diff oils was 20 front 300 center and 5 rear this worked well for me but will be trying lower oils in center . car was stable and fast .. as mike said still more playing to do but initial feel is good, thanks to richard lowe for all ya help |
|
|