|
#1
|
|||
|
|||
ZX5 - front one way issue
hey guys,
so I have been servicing my ZX5 and opened the front diff however it was full off shavings... well i asume it is shavings from the gears. I did hear what sounded like someone searching for gears during a crash recently but once the car was flat again the gears didn't make a sound. Please have a look at the link bellow for the pictures of the one-way and the diff housing http://imgur.com/a/k8QDm#0 has anyone had any experience with this one way? I got with with the car years ago and cant see how to disassemble it t replace the main gear, the vour screws cant be loosened completely and the gear cant go over the silver sleeve. any help will be appreciated!! Regards Jakes |
#2
|
||||
|
||||
The black ring furthest from the gear will pop off but it's a tight fit. You can then slide off the ali tube and then your gear.
If you download the original ZX5 manual it has all the info in there. |
#3
|
||||
|
||||
Rogers yer man on zx5's, but you may not have seen
Jimmy's build manual manual page click the above links, hope that's helpful, good car as I remember. We had little problem with the gears but some were always stripping and rebuilding the diffs. Good advice from jimbob the re the spacer. Last edited by JCJC; 11-12-2014 at 04:05 PM. |
#4
|
|||
|
|||
Quote:
Quote:
|
#5
|
|||
|
|||
Sorted!!
cheers guys!!
its all squared now and ready wit fresh gears!! |
|
|