SOLD Novak Havoc Pro Brushless ESC

[SteveDub]

Here for sale I have my Novak Havoc Pro brushless ESC

Overview
Novak's Havoc Pro Brushless ESC tops the list in the Havoc line because of its unmatched speed, economical price and advanced compatibility: The Havoc Pro is compatible with the entire Novak 540-sized brushless motor line and any ROAR-approved 540-sized sensored motor, all the way down to 3.5-turns.

A LOT OF PROGRAMMING IN A SMALL PACKAGE
Novak has packed the Havoc Pro Brushless ESC full of programmability into one easy-to-adjust profile. The Havoc Pro includes a customizable Throttle Curve, which smoothes out throttle operation. In addition, the Havoc Pro’s Brake Frequency adjustment contains seven degrees of adjustability from a smooth and controllable brake to a more abrupt and grabbier feel. The dozens of adjustments allow drivers to fine-tune their vehicle’s throttle braking for better control and advanced handling.

But the customization doesn’t end with braking. Novak also has built-in Battery Type Selection that auto detects among Li-Po, Li-Fe and Ni-MH batteries and prevents them from going below the critical safety voltage level, and a Motor Rotation feature that allows the user to easily select the direction of the motor.

MOTOR COMPATIBILITY
The Havoc Pro ESC is compatible with all Novak brushless motors and any ROAR-approved 540-sized sensored motor, all the way down to 3.5-turns. For the complete list of compatible Novak motors, click here.


Features
Nine adjustable parameters: Minimum Brake (10 settings from 0-30%), Drag Brake (10 settings from 0-30%), Dead Band (5 settings from 2-6%), Minimum Drive (5 settings from 1-12%), Throttle Curve (Linear, Expo-1 and Expo-2), Brake Frequency (7 settings from 1-8 kHz), Reverse, Motor Rotation and Battery Pack Selection (Li-Po, Li-Fe, Ni-MH)
Fifty percent more transistors than the Havoc 2S ESC for faster speeds, higher efficiency and increased load handling
One-Touch Set-Up for quick, easy transmitter setup
Locked Rotor Detection and Thermal Overload Protection (when used with a Novak sensored brushless motor)
Novak’s Radio-Priority and Polar Drive Circuits
Included 30x30x6mm ESC clear cooling fan (#5648) mounted on factory-installed heat sink




Specification
Input Voltage: 2S Li-Po cells, 2S Li-Fe cells or 4-6 NiMH cells (1.2V/cell)
ESC Footprint: 1.16" x 1.49" (29.5 x 37.8 mm)
Weight (without wires): 1.36 oz. (38.5 g)
On-Resistance (brushless): 0.00040 ohms @ 25°C trans. temp.
BEC: 6.0 volts DC / 3.0 amps
Rated Current: 540 Amps @ 25°C trans. temp.
Braking Current: 540 Amps @ 25°C trans. temp.
Voltage Cut-Off: 6.25V (Li-Po), 4.75V (Li-Fe)
Power Wires: 14G Super-Flex Copper-Strand Silicone Wire


RRP is £129.00 see link below:


http://www.elitemodelsonline.co.uk/P...-Brushless-ESC


It has been used at two buggy meets for 3 rounds and a final we are looking at 40 mins max.

Motor wires may need replacing if you have some distance from the motor but fits a B4 perfectly.

Please note that this will be in it's original box that shows a 6.5T motor included but this sale is for the ESC only NO MOTOR.

This has been tested before been removed from the buggy and is working fine.

Grab a bargain at £55 with free postage.


Item will be well packed for posting or collection is ok.

Thanks for looking