FOR SALE Durango 410 & Lots of spares

[RadioRacers]

Originally a DEX410R my durango was treated to pretty much all the good bits, some of these include.
- DJoint driveshafts
- Alum adjustable Rear hinge pin braces
- 21 degree alum caster blocks
- HD Rod ends
- 14mm Wheel hex conversion
- Ti-Ni Shock shafts (standard bore)
- Carbon shock towers
- Alum servo saver arm
- Rear flexbrace system (1 screw is missing from this)
- Alum rear gearbox inserts
- Alum rear driveshaft holder
- Full brass weight kit
- CNC cut diff rings F&R

The car is about 2 years old however I've kept up the maintanace having replaced most of the drivetrain in the last 6 months so as you can expect there's hardly anything left of the original car.
The shell has seen better days but if anybody is interested I can supply a brand new in packet proline bulldog 2012 shell for an extra £15.
The car does come with the Durango rubber pit mat and a few spare or older bits and pieces, and a bag full of hardware such as screws and bearings.
It also comes with 9 full sets of wheels and tyres, 1 x yellow mini spikes, 4x yellow mini pins and 4x Dboots. All of these tyres are worn but may be of some use if not just for the rims and inserts.















I will chuck in any spares I have for the car too which is quite a lot of moneys worth. Here's a list of all BNIP parts.
- 2 x pair of yellow front 14mm rims TD510016
- 2 x pair of yellow rear 14mm rims TD510017
- Slipper pads (2pcs) TD310031
- Diff gears 14T TD310001
- Rear outer hinge pins TD330041
- Gear input driveshaft TD310116
- Alum front hing pin brace FF TD330004
- 2 x Rear inner hinge pins TD330040
- Battery holder pins TD320006
- Shock caps & spring buckets TD330013
- Front bulkhead set TD330003
- Gearbox set F&R TD310039
- Front lower arms TD330026
- Shims 4x8x0.3mm TD709002

I also have some opened parts that have a few bits missing from them
- HD rod ends
- 2 x Pivot ball type A
- Shock seals
- Gearbox shims
- Diff e-clips
- X-rings
- Rear wishbones
- Gearbox set
- Pivot balls B-type
- STD alum caster blocks
- 250cst Shock Oil
- 20000wt diff oil
- Various springs, most of the spring set I think.
- Roll pins 1.6x14mm




I'm looking for £190ono delivered for the lot sold pending payment. May be willing to split if there's enough interest.
Paypal or bank trasfer accepted but buyer to pay fees.
any questions or offers then please feel free to PM me.
Thanks for looking.
Shaun