Ansmann X2 Setup-Low Grip

[turbosimi]

Hello


Can anyone share a setup with me for a low grip and very bumpy track?


Thanks to everyone!

[nosequehacer]

Big bore?

[turbosimi]

no but probably i will buy a set of them!

[ben44]

Here a setup with normal bore. On the rear 3 hole at 1.6Mm.
Caution, the oils was used when outside is 5°, so ajust them with your weather.
The tire used are the Caliber from proline because we need to used them in french national but you can find really better tires.

[turbosimi]

Hey

Thanks i will try the setup! Another question how many battery packs can you drive with the calibers till they are down? It would be one a low grip surface as said!

Thanks

[Cameo]

Check this one out.

http://www.petitrc.com/setup/kawada/...eSetup2011.pdf

Just a few things different for low traction.
1. Plastic front arm mount not the alum one.
2. 27.5 oil in the rear
3. TU0227 Alum rear brace & 20g weight

[ben44]

Originally Posted by turbosimi

Hey

Thanks i will try the setup! Another question how many battery packs can you drive with the calibers till they are down? It would be one a low grip surface as said!

Thanks

At this time i do 50 packs with the same tire. But i do many test when it was cold (0 to 3 °) and in M3, know they have do the M4 when it's cold.
But this tire aren't very good, the gripp lateral is very poor but the traction is quite Ok.
The bowtie are more interesting and my faorite are the hole shoot but they have a little life.