|
#21
|
||||
|
||||
![]()
As an FYI, both versions of the SX10 4w - standard and Pro come with big bores if you wanted to order from TQ.
__________________
Viper R/C Solutions Marketing Director website: www.viper-rc.com Facebook: Viper R/C Solutions Twitter: ViperRCTeam sponsored by: Viper R/C Solutions, J Concepts, ARC USA, X Factory, Xpert R/C US |
#22
|
|||
|
|||
![]()
Mine arrived today, there are some notable improvements over the TC-04.
The diff and slipper outdrives have been lightened and it's a different type of plastic, seems much better than the original (more like hot bodies). The bild starts tonight. |
#23
|
|||
|
|||
![]()
I heard the original 4wd ate up drive/bevel gears easily, has this problem been addressed?
also, if I buy the old plastic version 4wd, how do I know that the bevel gears are the updated ones, assuming that they have fixed the problem. |
#24
|
||||
|
||||
![]() Quote:
![]() ![]() ![]() The problem is that the kit only comes with 4 shims so you need to order an extra pack. Personally I use 3 front/rear and that gives a good mesh |
#25
|
||||
|
||||
![]()
I agree, the kit didnt have enough shims and people ran them anyway. I shimmed mine so there was just a tiny amount of play and it ran fine all season.
|
#26
|
|||
|
|||
![]() Quote:
Quote:
FYI - I've been building my new car, some points of interest. The centre diff/motor has been moved forward by about 6-7mm from the plastic car. The batteries have been moved fwd by 4-5mm The overall wheelbase is also shorter by about 2-3mm. |
#27
|
||||
|
||||
![]()
Where are you guys getting the extra packet of shims, do tcmodels have such a thing?
|
#28
|
||||
|
||||
![]() Quote:
I do not know if the later released kits come with more shims..? Mine was one of the early kits out, bought in april of 10'. Very interesting that they changed the motor and battery placement, it will change things significantly! |
#29
|
||||
|
||||
![]()
I've been totally slack I haven't even ran mine yet, it's just sitting there shiny as the day it was built, haven't ran the mid motor 2wd either
![]() ![]() |
#30
|
||||
|
||||
![]()
I have a few sitting here I could spare if you need them....
|
#31
|
||||
|
||||
![]()
It's ok I order some parts once in a while and I have at least one spare gear
![]() ![]() |
#32
|
||||
|
||||
![]()
Does anybody know when the Ansmann branded one will arrive in the UK?
I currently have a std X4 pro but with big bores and aluminium upgrade parts. Still unsure whether to keep waiting or just order the CF chassis from TC models |
#33
|
|||
|
|||
![]() Quote:
Also with the shims you have put them both on the gear side to make it as tight as possible. Quote:
It's worth the wait, couldn't be far off now that I have mine. ![]() |
#34
|
||||
|
||||
![]()
I was aware of the need for the plastic sides and new top decks. How come new centre shafts are needed?
|
#35
|
|||
|
|||
![]() Quote:
|
![]() |
|
|