B4 Tiverton starting set up

[andy05]

Has anyone got a decent starting set up for tiverton please.I have never raced there before. I have looked on cml but could only find one from about 3 years ago with ribs up front. I am going to be runnig losi studs and step pin rears.

Thanks in advance

[Body Paint]

this is Pidge's setup. I used it last time I ran my B4 there and it was ace.

[andy05]

Thanks craig

[Wraggy]

craig the washer on the chassis brace: is that one on the new one or the old one ????

[_sleigh_]

Does anyone know (Pidge or Craig) if the above set-up was using the super-short wheelbase???? It says short, but doesn't mention the inboard option...

[Wraggy]

Originally Posted by _sleigh_

Does anyone know (Pidge or Craig) if the above set-up was using the super-short wheelbase???? It says short, but doesn't mention the inboard option...

riightly or wrongly phil ive assumed its super short because of the 2 dots thats filled in the square.. ??

[Southwell]

Originally Posted by _sleigh_

Does anyone know (Pidge or Craig) if the above set-up was using the super-short wheelbase???? It says short, but doesn't mention the inboard option...

Yes yes, super short last time I spoke to Pidge. Ive been running that setup and it was ace at tivvy and just 5 wt higher all round and blue front springs and it was ace at CML and Eden Park.

[_sleigh_]

Thank you one and all, for answering my simple B4 question.

How did the song go "It's a whole new world......"

[Wraggy]

Originally Posted by _sleigh_

Thank you one and all, for answering my simple B4 question.

How did the song go "It's a whole new world......"

you havnt crossed over have you phil !!! ???

[_sleigh_]

Originally Posted by Wraggy

you havnt crossed over have you phil !!! ???

If I was going to come out, I wouldn't choose this forum to do it.

[OldTimer]

Originally Posted by Wraggy

you havnt crossed over have you phil !!! ???

If he had it would still be one of them strange cars with the motor hanging out the back

[Crash]

I know it's something that keeps getting mentioned but what is the difference between the old and new style chassis brace? I mean in terms of washers.

1 washer on new brace = 3 washers on old brace???

[Wraggy]

Originally Posted by Crash

1 washer on new brace = 3 washers on old brace???

yes crash thats how i understand it to be from various people .

[Richard Lowe]

Originally Posted by _sleigh_

If I was going to come out, I wouldn't choose this forum to do it.

Are you still talking about cars or something else entirely?!

[Crash]

Originally Posted by Wraggy

yes crash thats how i understand it to be from various people .

Thanks Paul

[Body Paint]

OMG @ Phil

It is indeed Xtra short W/B

and 1 washer on top of the new block

[losixxx]

whats the extra short wheelbase then?

[Chris Doughty]

Originally Posted by losixxx

whats the extra short wheelbase then?

remove some material from the front of the wishbone and then put an 030 spacer behind, also run short on the hub spacing as well.

thats what I ran anyway.

[millzy]

Personally I cut the0.03 nubbins at the rear of the anti squat/ toe in bar and spacers the A arms forward

Saves filing A arms down all the time if they snap, round out of need replacing.