monkey upgrades

[danny the elfman]

hey. Does anywhere make upgrade partss that will fit the mad monkey? Ive got schumacher shocks nylon idler gears full bearing kit ceramic balls and good tires. But as for rear brace mount brass weights and weighted bulkheads i'm stupmed. (im not really looking the aluminium rear hubs from tc models or anything like that) so can anyone help? thanks for reading

[Tom3012]

You dont need any other options than what you already have... In the ways of weight, i run a 74g rudebits lipo brass weight and a sheet of lead under the servo and 10g of lead on top of the servo, job done

Are you struggling with the set up or anything? Too much grip? Not enough grip? What kind of surface are you running on?

Tom

Ps thats in an x2c though, but you get the idea

[nicVEGAchildJR]

Tcmodels.net you can get everything you need On there

[danny the elfman]

Originally Posted by Tom3012

You dont need any other options than what you already have... In the ways of weight, i run a 74g rudebits lipo brass weight and a sheet of lead under the servo and 10g of lead on top of the servo, job done

Are you struggling with the set up or anything? Too much grip? Not enough grip? What kind of surface are you running on?

Tom

Ps thats in an x2c though, but you get the idea

im racing ok. Ive got two servo sized pieces of lead, well on the servo, and a sheet of lead in the battery tray. So i did much better than usual last thursday, but i just dont think that it can run to its full potential with out a wieght right over the front and rear wheels. And its a multi surface race track atm, but going indoors soon.