|
#161
|
|||
|
|||
Quote:
Thanks |
#162
|
|||
|
|||
They were just some thin axle shims I had around, chances are they are an AE part as they were floating round in my toolbox. Nitro clutch shims would do the job too
|
#163
|
|||
|
|||
Thanks, the probably an AE part helped. I found an axle shim kit from AE and it has a variety of different size shims. Hopefully one will fit.
|
#164
|
|||
|
|||
In the US, some people are starting to report issues with stripping spur gears. Anyone with this car having the same issue? I know some of you even run 300K diff oil and on high traction carpet. So you might be putting even more stress on the spur. But curious as we want to try and figure out the root cause.
|
#165
|
||||
|
||||
Quote:
Tip from Richard Lowe - When I built mine (same applied on the B44 motor clamp) I put the cam into the motor mount, screwed the clamp down on top of it, covered the little grub screw in thread lock (plenty) and screwed it in just until it stops. Then remove the clamp and screw the grub screw in another half turn or so, so it's just proud on the inside of the clamp. That way when you tighten the clamp down the grub screw bites into the cam a bit and stops it moving. It also pushes the clamp off the cam a touch in the middle and puts a bit of bend into it, so you've got the clamp trying to spring back straight working to hold the motor still too. |
#166
|
||||
|
||||
Just noticed that HB are now offering different shock towers as option parts on their site. Anyone know anything about them?
http://www.hpiracing.com/en/parts/112723/opt
__________________
Mike Baldwin - Caldicot |
#167
|
||||
|
||||
In-between positions compare to stock ones
|
#168
|
|||
|
|||
Quote:
Quote:
|
#169
|
||||
|
||||
Searching for a D413
Hi
Im searching to buy a D413 , anybody knows a store in europe with stock ? |
#170
|
|||
|
|||
what springs and piston/oil combination do you use for dry astro ?
__________________
AE SC10 4x4 TD DEX210 TD DESC210 |
#171
|
|||
|
|||
You can try 1.2x4 or 1.3x4 in front and 55-65 oil with some stiff springs, like Losi black.
In the rear i would go for 1.3x4 or 1.4x4 and 40-45 oil and yellow springs |
#172
|
|||
|
|||
Quote:
Specifically http://www.oople.com/forums/showpost...01&postcount=7 |
#173
|
||||
|
||||
Any for sale anywhere?
|
#174
|
||||
|
||||
Kits are due very soon I'm told and another batch of spares too. I was told two deliveries in August. One landed last week. Next week would be my guess.
__________________
PBM Racing 01773 769323 TEAM XRAY RC DISCO |
#175
|
||||
|
||||
I have been informed next batch of spares/kits are coming in On the 14th?
__________________
Corally SBX410 Associated B6d Tamiya M05 Tamiya M06 low rider pumpkin TLR 1.0,3.0 scte Yeldnips racing products Xfactoryuk Dms racing Corally uk |
#176
|
||||
|
||||
Spares are in on the 11th and 14th, and I believe the kits are the 22nd. I'll double check tomorrow though.
__________________
HPI Racing - Hotbodies |
#177
|
||||
|
||||
Good news with the next round of my regionals on the 17th,hopefully the spares I am after on in this batch. Trouble is I can see if we do not get in early then someone could easily bulk buy all the spares at once.
__________________
Corally SBX410 Associated B6d Tamiya M05 Tamiya M06 low rider pumpkin TLR 1.0,3.0 scte Yeldnips racing products Xfactoryuk Dms racing Corally uk |
#178
|
||||
|
||||
What are you after boss? I got everything I wanted last week from PBM Racing.
__________________
PBM Racing 01773 769323 TEAM XRAY RC DISCO |
#179
|
||||
|
||||
front standard shock tower and the front mount also.
__________________
Corally SBX410 Associated B6d Tamiya M05 Tamiya M06 low rider pumpkin TLR 1.0,3.0 scte Yeldnips racing products Xfactoryuk Dms racing Corally uk |
#180
|
||||
|
||||
Kits are due in on the 12th, not the 22nd
__________________
HPI Racing - Hotbodies |
|
|