Nosram international pro esc

[Naushad]

Got this refurbished by pugs..

But finding it difficult to determine the specs of this esc.

For example what turn limit does it go down to?

Any help appreciated!

[imull]

Is this the old black cased one from the late 80s early 90s? If so, it was very good and probably has a lowish turn limit, say 9t (as modern motors draw more than old ones).

[Naushad]

Thanks for the reply imull

No it's a rectangular red

[Naushad]

CAn anyone help me please?

[imull]

Any chance of uploading a photo?

[Naushad]

Sorry for the delay in reply imull. Pic is from my YZ10 rebuild library. Speedo has been refurbished since then.

Some more info would be great appreciated!

[pugs]

Originally Posted by Naushad

Sorry for the delay in reply imull. Pic is from my YZ10 rebuild library. Speedo has been refurbished since then.

Some more info would be great appreciated!

that one had a motor limit of 8 turns or over mate I belive

[Naushad]

Cheers Steve!!

[imull]

Looks like its got hot does it still run ok?

[pugs]

Originally Posted by imull

Looks like its got hot does it still run ok?

yes mate I fixed it the wiring looks a lot better too....

[imull]

Nice one I can remember my mates getting so hot all the solder flowed across the FET tracks (way back in the day). I spent ages cleaning it out between heats and the thing ran perfectly. Built to last, not like today

[pugs]

Originally Posted by imull

Nice one I can remember my mates getting so hot all the solder flowed across the FET tracks (way back in the day). I spent ages cleaning it out between heats and the thing ran perfectly. Built to last, not like today

cheers you can't even get the fets off the board on most modern speedo's

[imull]

Tell me about it, I have a pile with FETs welded to them. Some you can fix and some you can't and it's entirely random