|
#1
|
||||
|
||||
TeamC T8 1/8th Nitro Race Buggy
T8 V2 COMPETITION BUGGY
If you enter a competition with the goal to win, the T8 is your tool. Agility, toughness and loads of steering. Set your brakepoints farer, your acceleration points earlier and finally use throttle - cornering! The T8 is designed, tested, produced from racers for racers! The V2 edition features the latest stage based on racing experience and includes the following parts. New chassis plate TB801 front cab body Reworked fueltank Reworked differentials TU0839 aluminum holder TiN shock shafts Suspentionarm inserts polyaramid High volume, hard anodized housings in combination with 3mm TiN coated pistons serve minimum friction and maximum strength in any condition. The six-CVD shaft drivetrain system used in the T8T combine two most wanted features – toughness and lightweight. This serves a long live and less rotating mass. The 5mm CNC machined shock towers have been made of 7075 aluminium and allow multible shock and suspensionarm positions. To provide optimzed driving performances, suspensions arm are a mature unit in every car. Flexibility, strenght, best material and design are the key points. And ours serve you the best of all. Light weight differential outdrives 10.9 grade steel screws 6 CVD steel shafts Centraliced engine position Mud guards Silicon sealed ABEC 5 ball bearings (oiled) Clear lexan body 3mm 7075 aluminum chassis plate 5mm 7075 aluminum shock towers Insertlock ackermann system 16mm adjustable aluminium big bore competition shocks 125ml fueltank 4WD all-wheel drive Length: 515mm Width: 310mm Height: 190 Wheelbase: 325 - 330 mm Weight: 2450g Available now through your local hobby store. Visit www.s-m-d.co.uk
__________________
Jono |
|
|