Go Back   oOple.com Forums > General > Electrics

Reply
 
Thread Tools Display Modes
  #1  
Old 18-11-2012
FrogPrince82's Avatar
FrogPrince82 FrogPrince82 is offline
Member
 
Join Date: Aug 2012
Location: Newcastle Upon Tyne
Posts: 261
Question Speed Passion / DualSky - Some Help Please

Hi All,

I've got a SP Reventon R on order for the last 3 weeks. I chose it because it appeared to give a lot of features for the price, came from a very respected company and also would suite my alloy Exotek parts for added bling!

Since then I have seen quite a few threads and news of people having problems with them, especially with Savox servos (something I also have). As I'm coming back to RC I can't afford to have an ESC blow on me within 3 months and I don't have a spare to switch in if it gives me trouble at a meeting.

I've been wondering if it's worth asking for a different ESC to be sent instead and I've been looking at the DualSky 550-MJ as this is a similar price, so within my budget, and has only been receiving good reviews everywhere I look.

Is it worth asking for the change in my order?
Will the DualSky work with the SP Motor I have already received (8.5T)?
As you don't get a programming card etc with DualSky is it still easy to use?
Will the DualSky still have an issue with my Savox servo?
Are the issue with Reventon only due to user error or when using lower turn motors?

As you can see, I'm new to all the Lipos, ESCs and brushless motors so any advice would be greatly appreciated.

Thanks in advance
Reply With Quote
  #2  
Old 18-11-2012
(off)roadrunner's Avatar
(off)roadrunner (off)roadrunner is offline
Member
 
Join Date: Apr 2011
Location: rutland
Posts: 179
Default

I run a dualsky 550 running a 7.5 speed passion with no issues. So your 8.5 should be fine.

Great little esc for the money. Is worth getting a program box too
Reply With Quote
  #3  
Old 18-11-2012
buggy#0's Avatar
buggy#0 buggy#0 is offline
Senior Member
 
Join Date: Oct 2012
Location: Liverpool
Posts: 340
Default

I was getting the r, then went for dualsky. The motor will go straight with the esc, speed passion are actually a great brand (their motors are excellent) its just the reventon r is awful. Savox servos do draw high currents, and that can cause issues, but many use them without issue. You can buy a usb programmer or box too, I would recommend the box as you can adjust trackside. Just to ask, what car is this going in? I could help you a bit further then with cells etc.
Hope this helps.
Reply With Quote
  #4  
Old 18-11-2012
Muzzie's Avatar
Muzzie Muzzie is offline
Senior Member
 
Join Date: May 2011
Location: Mansfield
Posts: 326
Default

I have the SP R but wish I'd have brought the Dulasky.

I'm getting the 150a one for the 4wd
Reply With Quote
  #5  
Old 18-11-2012
FrogPrince82's Avatar
FrogPrince82 FrogPrince82 is offline
Member
 
Join Date: Aug 2012
Location: Newcastle Upon Tyne
Posts: 261
Default

Thanks for the info from you both, interesting that you have both gone for the DUalSky units, I'm starting to lean more and more that way the more I read about the Reventon R.

Thanks for letting me know that the motor will be compatible, I was worried their may have been a compatability issue as almost everyon seems to run the same brand motor and ESC. I will probably buy a DualSky motor if I ever need to rplace the motor.

Like you buggy#0 I was impressed by Speed Passion's reputation, but they seem to have realy dropped a clanger with the REventon R.

I can't stretch my budget to the programmer box straight away for the DualSky, so is it ok running without the advanced adjustability (maybe for a month or 2) in the mean time?

I will run a DEX210 and am only going to be doing club meetings for quite a while as I get up to speed. I already have 2 Voltz 4000mAh 30C lipos as they will do for clubing until I feel the need to do some regional meetings etc. then I will invest in some BARC approved higher spec ones.
Reply With Quote
  #6  
Old 18-11-2012
john333's Avatar
john333 john333 is offline
oOple Advertiser
 
Join Date: Dec 2010
Location: Notts
Posts: 1,424
Default

Yes you will be fine running without the programmer to start with, I believe you can adjust it using the button on the speedo, but that is a faff long term. The new programming box is really good, and great value for money.
__________________
John Jones

--SMD--INSIDE LINE MODELS--PR RACING UK--

My feedback
http://www.oople.com/forums/showthread.php?t=79696
Reply With Quote
  #7  
Old 18-11-2012
FrogPrince82's Avatar
FrogPrince82 FrogPrince82 is offline
Member
 
Join Date: Aug 2012
Location: Newcastle Upon Tyne
Posts: 261
Default

Cheers John, thanks for the info, I will try to get the programmer at a later date.

Might even manage to get it for Xmas! lol
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 04:34 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
oOple.com