|
#1
|
||||
|
||||
aaargh
not again, not another dead dremel...... ok anyone had or tried any other makes of multi tool and found them good, thats seven dremels and three cheapies i have killed, ok in about 15 years, but still...... and to top it all i marked and drilled the new chassis i was just finishing in the wrong place so the wheelbase is 10mm too short. not a good day.....
|
#2
|
|||
|
|||
are the dremel's actually dead or are the brushes toast ?
|
#3
|
||||
|
||||
normally speed control units, but this one is a comm segment failure. will patch up again with old parts, just want something more reliable
|
#4
|
||||
|
||||
as for the chassis, 177mm instead of 187mm is annoying...........
|
#5
|
|||
|
|||
Maybe give Proxxon stuff a look .. I've been told it's some of the best ...
|
#6
|
||||
|
||||
Maybe your not using the correct one for the job
http://www.tool-shop.co.uk/Dremel/To...e6b3e068b8233d How old is it? They have a two year guarantee
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
#7
|
||||
|
||||
Will have a look at the prroxxon stuff, have tried wire drive dremel in the past, found the wire restrictive so went back to the more expensive handheld ones.
|
|
|