|
#1
|
||||
|
||||
![]()
What's the best way to solder deans I'm trying to make a harnis for two sets of lips for my tuggy I can he two wires on one connector but can't get two on the other. Or am I going to have to just use big bullit connectors
![]() ![]() ![]() Help please |
#2
|
|||
|
|||
![]()
You trying to make a harness to connect the 2 to the esc?
|
#3
|
|||
|
|||
![]()
I made one like this for connecting 2x 2s in a 1/8 buggy
Hope this helps |
#4
|
||||
|
||||
![]()
Yep to connect two packs to the Esc never thought of the y harnis hmmm
![]() |
#5
|
|||
|
|||
![]()
Managed to find that diagram after hours of googling lol. Hope that helps
![]() |
#6
|
|||
|
|||
![]()
When soldering to one side of the connector, plug it in to the other side. This acts as a heat sink and stops the spades moving in the plastic to the extent you can't connect them after soldering them up. HTH
![]() |
#7
|
||||
|
||||
![]()
Yes mate thank you I don't know why I didn't think of that
![]() |
![]() |
|
|