|
|||||||||||||||
|
#1
|
||||
|
||||
|
Anybody got a good XXX-4 starting setup for a big grass track with big jumps (BRCA spec 1/8th rallycross track).
It will be my first time racing off-road too so a fairly conservative setup that I can dial in some more agressiveness as the day goes on would be good. I'll probably be running a 11x2 on GP4300's. |
|
#2
|
||||
|
||||
|
What track are you going to be running on??
We always used to run this setup on the XXX4g+: Front Piston - Blue Oil - 60wt Losi Springs - Black Shock position - 2 W/bone position - Inside Camber link - 1 Pivot support - 7.5 Castor block cut flush with 2 gold washers under the ball stud Rear Piston - Blue Oil - 30wt Losi Springs - Red Shock position - 2 w/bone position - inside Camber link - 2B W/base - Middle Pivot bock - 3R One-way diff fitted up front Gearing for an 11x2 try 21-22/92
__________________
Xray, Orca, 1UP Racing, Avid, X Factory UK, RC Disco, Hudy, RichPaint, RDT products, Screwz4rc http://www.screwz4rc.co.uk My Trader Feedback - http://www.oople.com/forums/showthre...hlight=tyreman
|
|
#3
|
||||
|
||||
|
Its a new track just being built here in N.Ireland so its never been ran before, its a fairly wide range of corners with a few big jumps. (Including a massive tabletop)
Since its a brca track its about 4m wide and 300m in length so its massive but quite bumpy. |
![]() |
|
|