SXX TC Temp Check System

[DaveG28]

Tried using this at the weekend and got confused! How quickly do you get the flashes, and does it repeat once finished?

Asking as I was getting a flash once every 3 seconds continually!?

[samd]

I have a nosram pearl(same speedo), i follow the instructions and just get the same as you dave, continuous flashing??

I think the old ones needed you to hold brake when you turned them off for the temp check to work, i am going to try it tonight.

[DCM]

I believe that is right, when you finish your run, you hold full brake and turn it off, when you then switch back on, it gives a temp indication, but then I got confused as to whether more or less flashes was good!

[mole2k]

More flashes = lower temp. It was something like one flash for every 5c below shutdown temp, but what the actual shutdown temp i've no idea. It wasnt documented.

[samd]

I think more flashes on the sphere/nosram evolution was better, something like every flash is 5deg under shutdown. On the pearl/sxx the manual says every flash is closer to shut down, so less is better.

Its just getting it to work thats the problem!!

[DCM]

OK, just read up on this, the procedure is

1) Hold brake down, turn off esc
2) Hold Mode Button down, turn on ESC
3) The ESC will flash 5 times, this is the max temp setting (thermal)
4) Every flash after that, is 8'c away from thermal i.e: 8 flashes and you are 24'c away from Thermalling.

[T4miy4 Guy]

Thanks its good to know as i`ve just bought one of these and hate reading instructions.

Cheers for the good explanation

Andy