Brushless Options

[DaveG28]

Hi all,

am looking to upgrade my 4wd buggy to brushless, after the second meeting in a row today where my brushed system desoldered itself from heat!

Basically, was wondering if people could advise me on:

Is the LRP Sphere comp. a good speedo option?

Is the Orion Vortex a good motor to go for?

Also, what "turn" brushless (4.5, 5.5 etc) would give me at least as much speed as my existing 8x1 brushed motor, and if possible better battery life too?

Cheers,

Dave

[ashleyb4]

I run a nosram matrix evolution with an orion votex 7.5 motor iv never had a problem with this combo. Ive ran this combo for a while now and the motor stays relaly cool and so does the speedo. I would recomend the nosram over LRP i know they there the same but i have seen more LRP's go pop than Nosrams.

As for motor a 5.5 would be the quickest you would ever want to go.

A

[tc2k]

Originally Posted by ashleyb4

I run a nosram matrix evolution with an orion votex 7.5 motor iv never had a problem with this combo. Ive ran this combo for a while now and the motor stays relaly cool and so does the speedo. I would recomend the nosram over LRP i know they there the same but i have seen more LRP's go pop than Nosrams.

As for motor a 5.5 would be the quickest you would ever want to go.

A

Thats rubbish, i bet they go pop at the same rate, if theyre the same then why would there be a difference

[ashleyb4]

Maybe its witch craft but ive never seen a nosram matric evoltuion go pop but ive seen loads of lrp sphere competitions go pop.

A

[AndyM]

Originally Posted by ashleyb4

more LRP's go pop than Nosrams.

they are exactly the same, i think thats probaberbaberbaly because the LRP is more popular, nd more people have them.

also, i think the 5.5 is meant to be exquivalent to 7 turn brushed,

[DCM]

Originally Posted by ashleyb4

Maybe its witch craft but ive never seen a nosram matric evoltuion go pop but ive seen loads of lrp sphere competitions go pop.

A

Did you not know, they xray all boards, and them with better and cleaner solder joints are put in red cases and the lesser quality are put in blue cases..... serious.....

[Northy]

Leave off Ash, he actually said he's seen more LRP's pop, which is what he has seen, therefore he can not be wrong on this point. He did not say that they are less reliable.

G

[DaveG28]

Cheers guys, so if a 5.5 is an equivalnet to that low a motr, any idea what its equivalent to in battery drainage?

[Northy]

Brushless are more efficient

G

[lazerboy]

Brushless motors equivalent to their brushed counterparts will have at least %20 longer run times b/c the motor doesn't have to work as hard to turn itself. thats why an 8.5 brushless is equal to a 15 turn brushed.(sounds opposite than it really is) When you go brushless do novak. B/c that's all they do, besides some 3 brushes speedo's. They are also cheaper and in my opinion look better that others with the purple and orange.

3.5
http://www2.towerhobbies.com/cgi-bin...?&I=LXNLY4&P=7
4.5
http://www2.towerhobbies.com/cgi-bin...?&I=LXMGJ2&P=7
5.5
http://www2.towerhobbies.com/cgi-bin...?&I=LXKSW0&P=7

And the only heatsink of it's type, one that is actually built into the motor, and is totally awesome looking.

Black
http://www2.towerhobbies.com/cgi-bin...?&I=LXNLZ3&P=7
purple
http://www2.towerhobbies.com/cgi-bin...?&I=LXNLZ5&P=7
blue
http://www2.towerhobbies.com/cgi-bin...?&I=LXNLZ7&P=7

Any small fan can be attached to these easilt as they are threaded to accept a fan. They do not need to be used with a fan though. To install these you actually take the purple sleeve off of the motor and put this on. Th heatsink cannot come off in a crash.

[DaveG28]

Thanks for the info, I had heard Novaks are less reliable though on brushless?

I have always run novak speedo's (currently run GTX's) and Orion motors (currently run various jansen edition motors), so do you know if the GTB is useable for brushed motors, and will it work with the orion vortex motors?

Are novak as reliable as LRP for these speedo's?

[Rob]

Originally Posted by ashleyb4

I would recomend the nosram over LRP i know they there the same but i have seen more LRP's go pop than Nosrams.

A

What a load of crap!

[lazerboy]

Yes, the gtb works for brushed motors, with no turn limit. The gtb's papers say it's useable with any novak motor. Novak does make a 3.5 turn motor so i would say yes. But just to be on the safe side order the velociti 3.5r, as it is only $6 more than theorion equivalent. if cooling is an issue, just add a heatsink with a fan, instead of a fan being spun by the motor. If the motor has to spin the weels and the fan, it's going to have to give up some power to the wheels.

[lazerboy]

Your gtb should have a fan on it, and if it doesn't, you can buy one. Rca did a review on the vortex motor, and they said it performed the same as novak and lrp motors. A 3.5 turn brushless is going to give you the power of a 6 turn brushed, and the run times of a 10. 4.5 Power=8 Runtime=12 so on and so forth. The main question is price looks and reliability, because they al perform about the same. I love what orion does with their brushed motors in the way of looks, but i don't know why they don't do that for their brushless. Plain black isn't my idea of good looking. The novak has cool colors, and the best looking(my opinion) motor heatsink ever. Now if you could just fing purple and orange wires to go alonk with it. And a new body, and some anodized aluminum, and new wheels, aw heck just get sponsored!

[DaveG28]

Hi,

Wouldn;t we all like to be sponsored, life would be much easier then!

Will the GTB work with the Orion motor then?

WIth comparisons brushless to brushed, how do I see that comparison, you mentioned 4.5 being equivalent to 8, I run 8 at the moment so this sounds ideal. However everyone I have asked has said 4.5 would be way too much overkill, whereas I find 8 turn fine (except for unsoldering itself every now and again!). Does this relate to the punch vs topend etc?

[lazerboy]

I know peeps who have the novak systems. They don't have problems. I don't know anybody who has the lrp or orion brushless. so i can't say bad stuff about them. The people who talk about exploding motors(literally) and speedo's that catch on fire are the ones who also say that their car can't take a jump without breaking. No! You can't go full throttle off of your roof and expect your car to live! NO! I've never broken anything other than cheap plastic traxxas axles, except whent i accidentaly dropped my tx while running my t-maxx and the batteries fell out. needless to say it smacked into a tree, and it left a mark. On the tree too.

[lazerboy]

i don't know if the orion will work. the best bet would be to call novak. You really need to get a good heatsink for your motor. I guess that they think that your asking about these systems that you don't know how to drive. If you can 4.5 isn't bad. It definitely has alot of top-end. You would gear it like the motor that your using, and yes it will have a little more torque because they don't make 7 turn brushed motors.

[DaveG28]

Thanks for the info again, just one final question. I have been fine on 5 minute races in my 501x all year with the 8 single, but in some outdoor conditions I am now dumping just at the end of the race. THis is despite having v expensive cells/charger (again all orion kit).

COmpared to the 8 single, will a 4.5 have less/equal/more battery run time? Also, same question for the 5.5!?

Thanks AGain,

Dave

[lazerboy]

!!!!!!I GOT KEY LIME PIE!!!!!

Because brushless is so much more efficient than brushed motors, the 4.5 will have abot 1 min more run time than the 8 turn.MMMMM SOOOOO GOOOOOD and the 5.5 will have even more.

[lazerboy]

i don't like tamiya