balance board for bantam bc6 to bionic lipo

[RC944]

anyone know which balance board i need to hook the charger to the following battery:

http://www.cmldistribution.co.uk/cml...tId=0000004737

it states a 2mm connector but not much else!

would it be the balance board for TPFP and MRX rather than align / dualsky?

[JCJC]

Not much help - but - something like this but with 4mm's instead of deans and then a board twix balance connector & charger ?

http://www.cmldistribution.co.uk/cml...tId=0000005276

(I was trying to stay with the cml site)

[RC944]

what about this beast:

http://www.modelsport.co.uk/index.php?product_id=32048

[JCJC]

Yea - like that, then possibly something BC6 to align for the balance, surprised the battery don't come with a cable.


Possibly like this: http://www.fast-lad.co.uk/store/cell...n)-p-1560.html



wait until some experts add to this before buying, you don't need to balance every charge

[RC944]

would have been ideal but all bought as seen off the flea bay... would be okay if had decent model shop where i live but alas that would be too easy!

[JCJC]

Possibly a cheaper cable option,
http://www.m-k-racing.com/product_in...oducts_id=7455

but balance connectors are a pain, seem to be a few different types, some with a few different names, some ...........

(I am assuming its the BC6 with the single large balance connector, there are some 'bc6' thingys with separate connectors)

[racingdwarf]

I have the BC6 copy that cml sell, with a ballance board with connections for 6,4,3 and 2 cell batterys, but the flight power batterys ballance conector didnt fit so I had to buy a bantam bord BUT the 3cell lipo in my rc plane will not fit the bantam board, but will fit the cml one???? most shops should have a choice of boards and they are not costly, just check that the board to charger conection is wired correctly for the bantam, bit of a bloody fiddle all this

After all this I use trakpower in my rc cars thus diffrent conections for that as well

[RC944]

ok just to update i have now potentially sourced a balance board so only the leads remain which i think are also sorted based on the intel on this thread - thanks gents!

[mark christopher]

just get second one down
http://www.trakpower.com/Products/leads.asp

[dale]

Originally Posted by mark christopher

just get second one down
http://www.trakpower.com/Products/leads.asp

Yep just bought a Bantam BC6 myself and got that lead. It means you don't need a stupid balance board getting in the way on the pit table. I got mine from here as it was cheap even with postage:

http://www.helikraft.com/FlightPower...2S-BC6%29.html