|
||
|
 |
|
||||||||||||||||||
|
#1
15-01-2011
|
||||
|
||||
up n running!!SHOCKS B44!!!!!!!!!
Hi lads got my car up n running have trouble with the b44's shocks.Ive built them 6 times now and everytime a hit a little jump they leak out!! its well frustrating shall i upgrade to v2s!!!or what!! ive even followed the tips on sanding down spacers the works!!! but on a lighter note its running well with all ORCA 6.5T and the ORCA Pro VRITRA system ORCA 4200 saddles, went for savox dig servo and 20 tooth pinion to get used it alll!!! tips on shocks would be a big help and al see you next meet!!!
|
|
#2
15-01-2011
|
||||
|
||||
|
Where are they leaking from?
__________________
Team Associated B44FT ~ LRP SXX TC Spec ~ LRP Vector X12 6.5t ~ Savox SC-1251MG ~ Spektrum DX3S Schumacher Cougar SV Pro ~ LRP Sphere TC Spec ~ Losi Xcelorin 6.5t ~ Savox SC-1257 ~ Spektrum SR3100 ~ Spektrum DX3S In progress: Team Durango DEX410 V1-V4 hybrid ~ DESC410V2 ~ DEX210
|
|
#3
15-01-2011
|
||||
|
||||
|
have you built them with some rebound mate? if you have try building them with hardly any this will take some pressure of the o rings and hopefully stop them leaking.also if you havent got the bleader caps they make them much easier to get right
|
|
#5
15-01-2011
|
|||
|
|||
|
i used to have the same shocks you have and I had to rebuild them every race meet.
|
|
#7
16-01-2011
|
||||
|
||||
|
These shocks are W@%K had a good run yesterday but had a blast this mornin and they where back to there leaky selves V2's ordered!!! cant believe team associated didnt come up with a better system than these absolute rubbish!!
anyway rant over!! you can all send me messages that say youve never had a problem with em ha ha!!!
|
|
#8
16-01-2011
|
||||
|
||||
|
I think its just some shocks. Between my RC10 and my Champ Bmaxx I've got 8 Associated shocks, and 7 are fine. 1 leaks whatever I do it it. New seals, new shaft - still leaks badly.
Woody's tried rebuilding it to no effect so its not just me. All the other ones I've rebuilt have worked fine. The only thing I can consider its the shock body itself must have a fault that prevents the seals aligning correctly. I've simply replaced them on the Bmax with Losi shocks. They don't have those issues.
__________________
 Yz4 - Yz2 DEX210 - Cobra 4210- DEX410 RC10 Team - Manta Ray - RC10T Mini Trophy - Blizzard - Wheely King Tz4 - GT24B BMRCC Emergency back-up race controller (but only if nobody better is available)
|
 |
|
|
Linear Mode
