Savox 1251 Low Profile Servo Lead

[Chesty]

These come with a VERY long lead. Must be a foot long!

I have an unsightly mass of wire because my rx is only about an inch from the servo

Servo leads that I have shortened in the past I have done inside the case - it doesn't appear so easy on this Savox because of the way the lead is mounted through the PCB...

Is it commonly done or do people shorten externally with these?

[MiCk B.]

Replace at the connector.

You'll need a crimping tool to do a neat job, that's what I do with all my servos.

MiCk B. :-)

[MiCk B.]

Here's a guide on how to do it!

http://www.rchelisite.com/how_to_crimp_servo_plugs.php

MiCk B. :-)