|
||
|
 |
|
||||||||||||||||||
|
#1
07-01-2008
|
||||
|
||||
next question
Got my car nearly setup just having a problem with the rear stepping out as you come on the power after a corner, this is on the slippy floor part of the track (although that is most of the track
 ) my setup on the back at present is0 degree camber 3 degree per side toe in 22mm ride height 5.5 turn spring 50 wt oil kit piston middle hole on rocker any help or suggestions appreciated peter 
|
|
#2
08-01-2008
|
||||
|
||||
|
Add some more toe-in, soften the oil a little.
Are there many jumps? What tyres are you using? G
__________________
Graham North http://www.atomic-carbon.co.uk https://www.facebook.com/atomiccarbon https://www.facebook.com/nortechracing 
|
|
#3
08-01-2008
|
||||
|
||||
|
Yes there's a few jumps and i'm using mini spikes.
peter
|
|
#4
08-01-2008
|
||||
|
||||
|
BIG jumps?
Spikes suit the Pred better than pins. Try what I suggested, let me know how it goes. G
__________________
Graham North http://www.atomic-carbon.co.uk https://www.facebook.com/atomiccarbon https://www.facebook.com/nortechracing
|
|
#5
09-01-2008
|
||||
|
||||
|
Went down to 40 wt oil and added 0.5 degree of camber, totally different car to drive, went so much better.
cheers for the help peter
|
|
#7
09-01-2008
|
||||
|
||||
|
Quote:
G
__________________
Graham North http://www.atomic-carbon.co.uk https://www.facebook.com/atomiccarbon https://www.facebook.com/nortechracing
|
|
#8
09-01-2008
|
||||
|
||||
|
Quote:
1 degree toe out 0 degree camber 30wt oil kit piston 6.5 turn spring castor 0 washers behind upper arm 16mm ride height
|
 |
|
|
Xtreme - VEGA
Linear Mode
