|
#1
|
|||
|
|||
High mounted DEX210 rear wing
What parts are needed to do this?
|
#2
|
||||
|
||||
I used a set of the 410 wing mounts and not real stable or supported and as yet untested.
Hopefully someone releases one soon, like what Jörn is driving |
#3
|
||||
|
||||
you'll need the rear bulkhead set TD330009 and some wing washers and m3 screws. for wing washers, i and a few others have used the 408 wing washers
http://www.rccarshop.co.uk/index.php...nium-2pcs.html Mark (tc3nitro) has put some pics up on here so you should be able to roughly see where to cut the rear bulkheads. Also you will have to dremel the side that goes against the tower flat. Its good mod, transformed my car making it stabler in corners making it easier to drive. hope thats helped. |
#4
|
||||
|
||||
This is what i used :
http://www.rccarshop.co.uk/index.php...khead-set.html If you look at my Jconcepts Finnisher thread then you can see a few pictures of how they were cut. Mark |
#5
|
||||
|
||||
Here you go !
|
#6
|
|||
|
|||
ok thanks. have you noticed much difference running it?
|
#7
|
||||
|
||||
Don't suppose anyone has tried this along with the rear shock mod?
__________________
Chris TeamC TM2, TC02EVO & TM4 Abisima, Savox and Orion Lazer ZX5-FS2, Rudebits DB1, Powered by Orion R10 and all Steered by Savox (and blind luck!). KoPropo EX10 Kyosho MP9 , OS Speed Paint by Magoo |
#8
|
||||
|
||||
It has certainly helped find more rear grip. I ran a cab forward body on my 210 at Robinhood at the weekend, it had mega steering but the rear had plenty of grip. This mod along with a small spur moving the motor back has really transformed the car. I personally have not tried mounting the shocks on the rear of the arms and don't know anyone who has tried it with these other changes. Mark |
#9
|
|||
|
|||
have you used two screws to fix the wing mounts to the shock tower? or 4 but i cant see the other two?
|
#10
|
||||
|
||||
Quote:
I just used the 2. When pictured mine were actually a bit lop sided ! I have now filed grooves out of the mounts where they hit the shock tower to help this. If i get a chance this week i will photograph it again. |
#11
|
||||
|
||||
someone at Torch tried the rear shock mod last sunday and liked it so looks as if i will experiment with them both this weekend, have been running a 78 spur for a few meetings and like that!
__________________
Chris TeamC TM2, TC02EVO & TM4 Abisima, Savox and Orion Lazer ZX5-FS2, Rudebits DB1, Powered by Orion R10 and all Steered by Savox (and blind luck!). KoPropo EX10 Kyosho MP9 , OS Speed Paint by Magoo |
#12
|
||||
|
||||
Rear shock mod and wing raised with cut down rear 410 bulkheads!
__________________
Chris TeamC TM2, TC02EVO & TM4 Abisima, Savox and Orion Lazer ZX5-FS2, Rudebits DB1, Powered by Orion R10 and all Steered by Savox (and blind luck!). KoPropo EX10 Kyosho MP9 , OS Speed Paint by Magoo |
#13
|
|||
|
|||
Hi Hotrodchris.
When you use the rear shock mod... what about the rear droop screws?? And as I can see, you have flip'ed over the rear lower arms (left to right and right to left) - but when you do that, will that not change the wheelbase?? René from Denmark |
#14
|
||||
|
||||
It actualy narrows it slighty!
When measured at UK Regionals mine is one of the few that come up legal width with schumacher mini pins on!
__________________
Chris TeamC TM2, TC02EVO & TM4 Abisima, Savox and Orion Lazer ZX5-FS2, Rudebits DB1, Powered by Orion R10 and all Steered by Savox (and blind luck!). KoPropo EX10 Kyosho MP9 , OS Speed Paint by Magoo |
#15
|
||||
|
||||
How did you find it like this?
My car feels very nervous on grass, it was perfect on astro, just can`t get the same dialled in feel on grass. |
#16
|
||||
|
||||
It was good on open flowing tracks but under steered on tight technical sections!
__________________
Chris TeamC TM2, TC02EVO & TM4 Abisima, Savox and Orion Lazer ZX5-FS2, Rudebits DB1, Powered by Orion R10 and all Steered by Savox (and blind luck!). KoPropo EX10 Kyosho MP9 , OS Speed Paint by Magoo |
#17
|
||||
|
||||
Yep Thats the problem i have , & when i run minispikes on the front it hooks too much and spins out.
|
|
|